Kinetik KISP-E160-LPS 160mm In Ceiling Flush Mounted Stereo Speaker, Ultra Thin Bezel, Round, Each, White

Additional Information

Description Specification Downloads

Kinetik KISP-E160-LPS 160mm In Ceiling Flush Mounted Stereo Speaker

The KISP-E160-LPS is designed for installation in ceilings, or other suitable surfaces such as plasterboard walls. It is a stereo, two way array design with 160mm polypropylene bass/mid driver and two pivotable 13mm Mylar dome tweeters. The low profile construction with full surface speaker grille provides the professional finish demanded in current architectural design. The tweeters can be angled 30 degrees in any direction from the centre thanks to their ball and socket design. A single KISP-E160-LPS speaker has a stereo input and provides a stereo high frequency output, ideal for use in hallways or smaller rooms such as bathrooms.

Two Way Array Design
The KISP-E160-LPS stereo speaker combines the requirements of two individual speakers into one. Offering both the left and right audio channels, through one speaker enclosure. This is particularly useful for smaller areas where it might be difficult to position 2 mono speakers.

Low Profile Grilles
The grilles are held in place magnetically by high power magnets. There's a choice of interchangeable and paintable round or square grilles (square available separately), to help blend into the design of any surroundings.

Pivoting tweeter
The KISP-E160-LP speakers have a wide dispersion and boast a 360 degree tweeter housing, adjustable to 30 degrees off axis. This increases the variety of locations you can install each speaker and helps optimise the listening position(s)

Box contents: 1 x in-ceiling speakers
1 x speaker grilles
Additional Accessories: 1 x cut out template
1 x instruction manual
Technical/General: Bass Driver: 160mm Polypropylene
Tweeter: 13mm mylar dome with auto protective reset switch
Recommended power: 10-125W
Impedance: 8 ohmper input
Sensitivity: 88dB
Frequency response: 55Hz-22kHz
Cutout size: 204mm
Mounting depth: 92mm
Speaker weight: 1.46kg
Speaker weight: 1.6kg
Packed weight: 37mm
Maximum surface thickness: Dimensions: Please see spec sheet


  • 55Hz - 22kHz Frequency Response
  • 2 x 13mm Mylar Dome Tweeter
  • 2 x 10 - 125W (RMS)