Kinetik KLIR-SM2KIT Surface Mount IR Kit

Additional Information

Description Specification Downloads

The KLIR-SM2KIT is an Infra Red (IR) signal transport device. It is designed to extend the communication between an IR remote control and respective AV equipment e.g. Blu-ray player, set-top box, amplifier etc, which can be in a different room or hidden location. The IR receiver can be surface mounted for optimal and versatile positioning (on a TV bezel for example).

Kinetik IR kits work with all Sky HD boxes.

Components 1 x surface mount IR receiver
1 x connection block
2 x dual IR emitters
1 x jack to jack cable
5 x emitter covers
Additional accessories 1 x receiver double-sided stick pad 5x replacement emitter sticky pads
5 x replacement emitter cover adhesive tabs
1 x instruction manual
IR Frequency bandwidth: 38kHz +/-2kHz
Technical/General information: IR frequency bandwidth: 38kHz +/-2kHz
Control range: 15m (6m in direct sunlight)
Reception angle: +/- 45 degrees
Connection block inputs: 1x 12V DC
1x 3.5mm jack IR
1x Phoenix connector (12V DC / ground / IR)
Connection block outputs : 4x 3.5mm jack IR
Power (supplied adapter) : 12V DC, 660mA
Power Consumption (Stand By):13mA
Power (in use): 40mA (approximate)*
Receiver dimensions (H x W x D) : 10 x 65 x 10mm
Connection block dimensions: 23 x 70.5 x 55.5mm
Emitter Dimensions : 7 x 10 x 14mm( Cable Length 3m)
Power supply dimensions: 57 x 47 x 64mm (UK)
57 x 45 x 77.5mm (Europe)

*Power consumption can vary with system size, combined IR equipment and signal variations.

Features

  • 15m Control Range (6m in direct sunlight)
  • +/-45 Degrees Reception Angle
  • 38kHz +/-2kHz Frequency Bandwidth